CYP CDPS-U42HPIP, Инструкции по эксплуатации

Страница: 10 / 48

5
7 DC 12V: Plug the 12V DC power adapter into the unit and connect
it to an AC wall outlet for power.
6.3 Remote Control
1 POWER: Power on the machine or enter
to standby mode.
2
INFO: Display the current status/
information of the unit.
3
A1~A4 & B1~B4: (Matrix Selection)
A
When all inputs and outputs are below
4K: Press any of these buttons to
seamlessly switch to the selected input
(1~4) for display on the associated
output (A or B).
B
When any input or output is 4K: Press any
of these buttons to seamlessly switch to
the selected input (1~4) for display on
both outputs simultaneously.
Note: Audio for both outputs will follow the most recently selected
input (from A or B) in both modes.
4
MV1~MV4: (Multiview Selection) Press these buttons to switch
immediately to the corresponding Multiview output mode.
MV1: Switch to 2×2 quad view mode.
MV2: Switch to the 3+1 quad view mode.
MV3: Switch to the side-by-side view mode
MV4: Switch to PiP view mode.
5
MATRIX/MULTIVIEW: Press to toggle between the Matrix and
Multiview modes.
6 LOCK: Press to lock all button functions on the front panel. Press the
button again to release the lock function.
7
ARROWS (

/

/

/

) & OK: Press the arrow buttons to navigate
the LCD menu. Press the “OK” button to confirm a selection or to
go deeper into a menu item.
8
MENU: Press to enter the LCD menu.
INFO POWER
A1 B1
A2 B2
A3 B3
A4 B4
MV1
MV2
MV3
MV4
LOCK
MATRIX/
MULTI VIEW
EXIT MENU
OK
SAVE
PRESET
W1
W2
W3
W4
SOURCE
MUTE
UP
DOWN
AUDIO
CR-180
2
3
11
6
9
10
1
4
5
7
8
12