CYP CDPS-U42HPIP, Инструкции по эксплуатации

Страница: 12 / 48

7
6.5 Telnet Control
Before attempting to use Telnet control, please ensure that both the
unit and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7 Click Start , type “cmd” in the search field, and
press Enter .
Windows XP Click Start > Run , type “cmd”, and press Enter .
Mac OS X Click Go > Application s > Utilities > Terminal .
Once in the Command Line Interface (CLI) type “ telnet ” followed by
the IP address of the unit (and the port number if it is non-standard)
and then hit “Enter”. This will connect us to the unit we wish to control.
Type “ help ” to list the available commands. See below for reference.
Note: If the IP address is changed then the IP address required for
Telnet access will also change accordingly.
6.6 RS-232 and Telnet Commands
6.6.1 Basic Commands
COMMAND
DESCRIPTION VARIABLES
HELP

Show the full command list.
?

Show the full command list.
GET FW VER

Show the current firmware
version.
GET MODEL NAME

Show the model name.