Cylon American Auto-Matrix Aspect Matrix MAX Скачать руководство пользователя

Страница: 12 / 12

This document is protected by copyright and is the property of American Auto-Matrix. It may not be used or copied in whole or

in part for any purpose other than that for which it is supplied without authorization. This document does not constitute any

warranty, expressed or implied. In the event of any conflict between the English language version and the translated version, the

English language version shall take precedence.

Every effort has been made to ensure that all information was correct at the time of publication. American Auto-Matrix reserves

the right to alter specifications, performance, capabilities, and presentation of this product at any time.

All trademarks, trade names, service marks, or logos contained herein are the property of their respective owners and are only

used to describe the product(s) being listed in this document. Every effort has been made to properly capitalize, punctuate, and

identify and attribute all required trademarks with the use of the appropriate ® or ™ wherever practical and possible. American

Auto-Matrix is not affiliated or a licensee holder of any of the trademarks other than those detailed below. American Auto-Matrix,

the American Auto-Matrix logo, the Rocket-A, Smart Building Solutions, Aspect, Aspect-Enterprise, Aspect-Facility, Aspect-Matrix

MAX, Aspect-Nexus, Aspect-Studio and vSTAT are either registered trademarks or trademarks of American Auto-Matrix.

One Technology Lane

Export, PA 15632

(724) 733-2000

(724) 327-6124

www.aamatrix.com

[email protected]

Part No : 1E-01-00-0067

© American Auto-Matrix, A Cylon Energy, Inc. Company.

American Made

Содержание American Auto-Matrix Aspect Matrix MAX












