Cylinda TS 2190, Руководство пользователя

Страница: 54 / 64

54
Overheat cut-out:
The cabinet is equipped with an overheat cut-out. This trips when the temperature in the
fan unit exceeds 120 °C.
ECO Sensor drying cabinet
When the overheat cut-out has tripped, the display and LEDs flash. The user can now reset the overheat
cut-out by
turning off the power supply with the switch inside the roof of the cabinet.
See illustration.
The user has to wait for 10 to 15 minutes before the temperature has fallen and the overheat cut-out
recloses. The power supply to the cabinet can then be turned back on using the same switch.
Timer drying cabinet
When the overheat cut-out has tripped, the cabinet is closed and the timer stops for example at 2 hours
with the laundry wet. The timer is then turned to zero to reset.
The user has to wait for 10 to 15 minutes so that the overheat cut-out has time to reclose. The power
supply to the cabinet can then be turned back on again with the timer.
Breakdowns