CYCMOTOR X1 STEALTH GEN 3, Руководство пользователя, Страница: 36 / 38

You are advised to regularly maintain, clean and check the status of the
bike and motor system as dirt will accumulate throughout the rides and
additional strain will be taken by the drive train due to the powerful
motor system. We recommend that users should inspect the bike and
motor condition before and after each ride.
Disconnect all power supplies from the drive unit before starting any
work (e.g., inspection, repair of the bike, maintenance work etc,) on the
bike, transportation or sotrage. Unintentional activation of the drive
could lead to serious damage or injury.
Never reach into the chains, gears or any moving parts while the bike is
still in operation.
As the drive unit can get hot after use, be sure to give it some time to cool
down before performing any maintenance.
Store the bike in a cool and dry place, sheltered from direct sunlight and
potential rain.
Do not attempt to disassemble or modify the drive unit. The drive unit
may only be repaired and maintained by qualified experts and only
replaced with original spare parts. This will ensure that the
safety/warranty of the drive unit is maintained.
The active moving parts (e.g., chain, gear, speed reducer etc.) should be
regularly lubricated to maintain desired performance. In case of any
abnormal activity, stop using the drive unit immediately and contact your
CYC dealer.
Do not attempt to replace the X1 PRO parts with the parts that have been
found at a local bicycle store as the materials used in the drive unit are
specifically designed for their purposes.
All bolts, nuts and screws are required to be tightened to the correct
torque, if there is anything loose, stay off the bike. Torque specifications
for each bolt and nut is provided below.
35