CYCMOTOR X1 STEALTH GEN 3, Руководство пользователя, Страница: 11 / 38

RIGHT-HAND and LEFT-HAND sides are determined by the bike handle;
Right-hand corresponds to the right handle.
The CYC X6 controller can be mounted below the bottom bracket
(pre-assembled by default) or mounted elsewhere on the bicycle frame at
the user’s discretion using controller extension wires that can be selected
upon purchase or bought separately from the CYC online store or an
authorized dealer.
NOTE: The controller comes pre-assembled at the bottom bracket
between the mounting plates.
In order for the X1 Stealth to fit on various different widths of bottom
brackets, there are several spacers that come with the kit. These spacers
are designed to provide the bottom brackets with necessary spacing
between the X1 Stealth brackets.
The preferred mounting set-ups are shown on the next page for 68mm
and 73mm bottom brackets. Note that the spacers can be adjusted to
accommodate different chain lines as needed.
Before you begin, ensure that you have removed the original crankset
and bottom bracket from your frame. This includes any bearings and/ or
cups that might have been fitted previously. To install your CYC kit, you
will need a clean bottom bracket shell on your frame.
10