CYCMOTOR X1 STEALTH GEN 3, Руководство пользователя, Страница: 14 / 38

Add 2xM5*6 screws into the left (non-drive) side adaptor bracket and the
mounting bracket.
Add the 5mm bottom bracket spacer provided outside the adaptor
bracket plate on the left (non-drive) side of the frame. Thread the left
(non-drive) side bottom bracket cup into the frame’s bottom bracket shell
through the spacer and the adaptor bracket plate. Rotate clockwise.
Insert the spindle from the right (drive) side. Note that you will need to
line up the splines with the chainring assembly. If your spindle does not
go through or comes to a hard stop before being fully inserted, rotate the
spindle a bit and try again. Once the spindle is lined up, a soft tip hammer
may also be used to get the spindle all the way through.
Install the motor hanger (see page 17) and place the rubber padding
provided in between the motor and the frame.
03.
04.
05.
06.
03.
05.
04.
06.
13