CYCMOTOR X1 STEALTH GEN 3, Руководство пользователя, Страница: 27 / 38

TOPOLOGY SW102
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology
Intelligent Technology Co., Ltd. (otherwise known as Topology). All the information contained in this manual is published in
good faith and for general information purpose only. Contact technical_support@cycmotor.com for further assistance.
Electrical Specifications
x Power supply
烉
DC 24V/36V/48V
x Rated current
烉
12mA
x Shutdown leakage current
烉
<1uA
x Screen specification
烉
1.3” OLED
炷
64*128 dots
炸
x Communication method
烉
UART (default)
x Operating temperature
烉
-20°C ~ 60°C
x Storage temperature
烉
-30°C ~ 80°C
x Waterproof level
烉
IP65
Quick start guide
After unboxing and installing your CYC motor system, there are two main things you need to
set up.
1. Change your Battery No. setting according to your rated voltage.
Within 15 seconds of turning on your display, long press the MENU button to enter the
settings functions. Press UP/ DOWN to navigate the settings page & MENU to select.
6s = 22.2V
7s = 25.9V
8s = 29.6V
9s = 33.3V
10s = 36V
11s = 40.7V
12s = 44.4V
13s = 48V
14s = 52V
*Please note that 6s to 9s is not compatible with the CYC systems. This will be removed in
future batches. Our apologies for the confusion.
TOPOLOGY SW102
The information contained in this document is derived from the TFT LCD Display Guide provided by Zhejiang Topology
Intelligent Technology Co., Ltd. (otherwise known as Topology). All the information contained in this manual is published in
good faith and for general information purpose only. Contact technical_support@cycmotor.com for further assistance.
2. Change your Wheel setting according to your bike’s wheel size.
3. Now, you can set things up like your temperature and speed unit as well as your
brightness level. Otherwise, you’re good to go!
Functionalities
Power On/ Off
Press and hold the POWER button for 2 second to turn the display on/ off. The display will
automatically shut down when there is no operation for a period of time.
Navigation
The MENU button is used to go into your main settings page & your clear data page. It is
also used to enter and select a setting or function.
1. POWER
2. MENU
3. UP
4. DOWN
26
SW102 DISPLAY USER GUIDE
04