EDGE
Page 2
CVHC-01-01/02/03 Revision L Instruction Manual Revision-5 (13-01-2019)
GETTING STARTED
Congratulation on purchasing your Cyclevision advanced concept Cycling Helmet! But please remember No
bicycle helmet can protect the wearer against all possible impacts, ride safe, stay safe and please refer to SET UP
CYCLEVISION HELMET to make sure you properly adjust the Cyclevision helmet to suit.
For the best experience, we recommend fully charging the internal 3200mA Lithium Polymer battery before first use.
Full charge is indicated by illumination of x4 battery status indicator lights (page6 - item 18).
The Cyclevision helmet comes with dual integrated 32 GB memory cards which are not removable nor
upgradeable; one 32 GB Micro SD card is located within the front camera housing, the other 32GB Micro SD card is
located in the rear camera housing.
Each camera records in 1080p = 1920 x1080 x 30fps HD vision, each memory card is written at approximately 100Mb
per minute of record time; the vision data files are recorded in 2-minute loops; If the integrated memory becomes
full during recording, the older video files will be overwritten by the newer video file. This process (under normal
circumstances) will occur every 4 hours of recording time.
Do not attempt to open the helmet to change the cards under any circumstances, the housings have been sealed
and damage to the housings, camera and PCB will result. Any attempt to open the camera housings will result
voiding of the warranty.
