Joule 2.0 User Guide page 50
Setting Up Speed Sensors
Joule 2.0 is compatible with ANT+ speed sensors, each having a unique code. Joule 2.0 needs to
be paired to each sensor to ensure proper functionality. Once set up, sensors can be managed
using PowerAgent software.
1. Press and release the [MODE] button until
Main
mode is displayed.
2. Press [JOYSTICK] in and release to select
Sensors
.
3. Press [JOYSTICK] up/down to highlight
Speed Sensor
. Press [JOYSTICK] in and release to select
Speed
Sensor
.
4. Press [JOYSTICK] up/down to highlight
Add Speed
or
Add Speed Cad
. Press [JOYSTICK] in and release to
select
Add Speed
or
Add Speed Cad
.
5. Make sure the Speed Sensor is awake and isolated from other active sensors by 65 feet/20 meters. Note: For
most Speed Sensors, rotating the wheel will wake up the sensor.
6. Press the [JOYSTICK] in and release to
Start Pairing.
Pairing may take up to 60 seconds. Once pairing is suc-
cessful, the sensor ID will be displayed.
The sensor will be automatically activated after successfully pairing.
7. Press [JOYSTICK] up/down to highlight
Name
. Press [JOYSTICK] in and release to select
Name
and change
the name of the paired speed sensor. Press [JOYSTICK] in and release to save changes.
8. Press [JOYSTICK] up/down to highlight the
Wheel Circumference
and press [JOYSTICK] in and release to
select wheel circumference. For a list of common wheel circumferences see FAQ section.
9. Once a sensor has been paired and activated Joule 2.0 will automatically fi nd the active sensor whenever it is
turned on.
Chapter 6: Sensors
