CycleLabs SmartHalo, Руководство пользователя

Страница: 11 / 41

11
If you don’t see your SmartHalo in the device list
Your Bluetooth is off. Make
sure Bluetooth is
activated on your phone.
The SmartHalo has run out of
battery. Make sure the battery is full
by plugging it to a power source via
USB. Once connected to a power
source, you can tap once on the
device to check the current battery
level.
The device is in a deep sleep state.
If this is the first time you’re using
SmartHalo (or if SmartHalo is not
currently associated with an ac-
count), you might need to wake it up
from a deep sleep state. To do that,
simply plug SmartHalo in a computer
using the provided USB cable. You
will see a green light in the center of
the device for a few seconds. You
can then pair it with your phone from
inside the SmartHalo app, by clicking
the «Not connected» button at the
bottom of the right side drawer.
The device is currently linked
to another user account. You
must log into the app with
that account (or ask the cur-
rent user to do so) and follow
the instructions to unlink a
device.
There a couple reasons why you would not see your device in the device list :