CYC Motor X1 Stealth, Руководство пользователя

Страница: 4 / 25

01
SAFETY & PRECAUTION
Installation & Use Disclaimer
Do not install anything other than the parts and accessories that
came with this drive unit. Doing so could damage the product.
The drive system can be activated and deactivated by holding
down the on/off button on the display.
Avoid changing the bike gear (note: this is different from the drive
unit's assist level) while the drive unit is powering the bike. This
may lead to excessive wear on the chain and chain rings or other
gear related failure.
When changing gear, use human input only. After the gear is
changed, you may accelerate again with the throttle or continue
using the PAS.
Take off with the appropriate assist level & bike gear.
This product is splash proof and rain proof but NOT WATER PROOF.
Do not submerge it underwater.
If you require any more information or have any questions about
the user manual disclaimer, please feel free to contact us via email
at support@cycmotor.com or call +852 3690 8938.
All the information contained in this user manual is published in
good faith and for general informational purposes only. CYC Motor
Ltd does not make any warranties about the completeness of this
information and encourages further inquiries as stated above if
needed. CYC Motor Ltd will not be held liable for any losses and/or
damages in connection with the use of this product. The use of this
product is at the user’s own risk.
Notice: Please contact CYC Motor Ltd if unsure about the assembly
instructions or for any further assistance as CYC Motor Ltd will not
be held liable for any losses and/ or damages caused by the
assembly.