CYC Motor X1 Stealth, Руководство пользователя

Страница: 20 / 25

05
QUICK START
STEP 1
Ensure that all wires are properly connected & that your system can
switch on by long pressing the display’s power button. Check that
the display shows your battery voltage & level. Should your display
briefly show Error 30H upon start-up, this is normal as the system
takes a moment to connect. Should your battery voltage & level not
display, refer to step 3.
STEP 2
Ensure that your pedal assist & throttle are working correctly. To
test this, connect to the app & change to Assist Level 0 on your
display. You can test the PAS by looking at the app’s dashboard &
turning the crank set. If your Average Pedal RPM reading changes,
then your PAS is working. To test the throttle, open your throttle &
check that your Throttle In voltage changes.
STEP 3
Set up the correct information on your display. You will need to
enter your wheel diameter, battery voltage (if incorrect), & your
preferred number of assist levels. Kindly see your display’s user
manual for instructions.
Ensure that you test the PAS & throttle in Assist
Level 0 as to prevent your bike from thrusting
forward.