CYC Motor X1 Stealth, Руководство пользователя

Страница: 11 / 25

03
INSTALLATION
Operating Notice
RIGHT-HAND and LEFT-HAND sides are determined by the bike
handle; Right-hand corresponds to the right handle.
Mounting Options for Controller
The BAC855 controller can be mounted below the bottom bracket
(pre-assembled by default) or mounted elsewhere on the bicycle
frame at the user's discretion using the controller extension wire
that can be selected upon purchase or purchased separately from
the CYC online store or an authorized dealer.
NOTE: The controller comes pre-assembled at the bottom bracket
between the mounting plates.
Adjusting the Width of Bottom Bracket
In order for the X1 Stealth to fit on various different widths of
bottom brackets, there are several spacers that come with the kit.
These spacers are designed to provide the bottom brackets with
necessary spacing between the X1 Stealth brackets.
The preferred mounting set-ups are shown on the next page for
68mm and 73mm bottom brackets. Note that the spacers can be
adjusted to accommodate different chain lines as needed.
Before mounting the motor body to your bike frame, the existing
crank system and bottom bracket must be removed.