CYC Motor X1 Stealth, Руководство пользователя

Страница: 3 / 25

01
SAFETY & PRECAUTION
General Safety Before the Ride
Kindly read through the entire user manual. This manual contains
important information to reduce user risk as well as instructions for
this product’s proper use. Do not discard the manual but keep it for
reference.
Note that the user’s personal safety remains the user’s
responsibility and that the user must contact CYC Motor Ltd or their
official product dealer directly for any further guidelines or
assistance.
Never interfere with the movable parts when the drive unit is
connected to a power supply. This could result is serious injury if
the system is accidentally engaged.
This product is a powerful motor system that is dangerous for
children and must be handled by an adult at all times. Small
components and accessories may also present a choking hazard.
Keep the motor system and accessories out of reach from children.
All components and accessories may only be replaced with
identical components directly supplied by CYC Motor Ltd or an
official product dealer. CYC Motor Ltd cannot be held liable for any
damage as a result of using unapproved parts.
This product only complies with local, state, and federal
regulations if speed limits are set accordingly. Ensure that you have
set up your X1 Stealth kit according to your local, state, and federal
regulations when using and registering this drive unit on a public
road/ area.
Ensure that the drive unit chain has the proper tension. Incorrect
tension could cause jamming of the system and result in injury
while riding. Inspect the chain tension regularly.
Ensure that the chains are properly lubricated. Cleaning and
lubricating your chain with regular bicycle chain cleaner, is advised
regularly.
When connecting a power supply, make sure the power supply is
completely connected. Faulty connection could result in a short
circuit and damage the controller or batteries.
Inspect all electrical wires and plugs for damage regularly.
Secure all wires properly. Ensure that no loose wires are dangling
from the bike that could be jammed into any moving parts.
Before turning on the system, ensure that the throttle can be
twisted freely without friction and that the throttle can return to its
original position without restriction. This is to prevent any
uncontrolled response of the system.