CYBEX R Series, Руководство по сборке

Страница: 38 / 48

8. Slide pivot pin assembly out and remove right handle assembly.
9. Rotate right handle assembly 180 degrees.
10. Apply Loctite to threads inside the pivot pin and screw.
11. Place right handle assembly in position and slide pivot pin assembly back in place.
12. Install the screw and washer to the right handle assembly using two 7/32” Allen wrenches.
Install Left Linkage Rod
1.
Pivot left handle assembly up and slide left linkage rod onto left arm.
Qty Description Item
1
Screw, Socket Head, .250-20
UNC-3A SS
1
1 Loctite #242 2
1
Washer, Flat, .281 ID x .500 OD x
.062”
3
1 Linkage Rod Cap 2.00 OD 4
1 Flange Spacer 5
1 Left Arm 6
1 Left Linkage Rod 7
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16” Allen wrench.
4. Tighten screw to a minimum of 90 in-lbs.
Install Right Linkage Rod
1.
Pivot right handle assembly up and slide right linkage rod onto right arm.
Qty Description Item
1
Screw, Socket Head, .250-20
UNC-3A SS
1
1 Loctite #242 2
1
Washer, Flat .281 ID x .500 OD x
.062”
3
1 Linkage Rod Cap 2.00 OD 4
1 Flange Spacer 5
1 Right Arm 6
1 Right Linkage Rod 7
2. Place a drop of Loctite onto the screw.
3. Install the screw, washer, linkage rod cap, and flange spacer using a 3/16” Allen wrench.
Page 38 of 47