CYBEX CI-FLY, Руководство по сборке

Страница: 22 / 36

4. Place threaded cap onto the shaft of the left upper work arm assembly.
5. Repeat Steps 1-4 to install the right upper work arm assembly
6. Route one end of the cable into the right cam assembly.
7. Install cable retainer securing the cable to the right cam assembly.
8. Install screws, washers, and locknuts securing the cable retainer cover plate to right cam assembly using an 8mm Allen wrench
and a 17mm wrench.
Item Description Qty.
1 Cable 1
2 Cam Assembly, Right 1
3 Cable Retainer 1
4 Cable Retainer Cover Plate 1
5 Screw, M10 x 1.5, 50mm 2
6 Washer, Flat 3/8" 2
7 Nut, M10 x 1.5, Hex Nylock 2
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
NOTE: Make sure the work arm is engaged in detent position "3" to easily access the screws.
Page 20 of 34