CYBEX CI-FLY, Руководство по сборке

Страница: 25 / 36

15. Install screws, washers, and pivot shaft securing the left lower work arm assembly to the left upper work arm assembly using a
7mm Allen wrench.
Item Description Qty.
1 Lower Work Arm Assembly, Left 1
2 Upper Work Arm Assembly, Left 1
3 Pivot Shaft 1
4 Washer, .375" 2
5 Screw, M10 x 1.5, 25mm, Low Head with Loctite 2
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
16. Repeat Step 15 to install the right lower work arm assembly to the right upper work arm assembly.
Install Front Shrouds
1. Set front shrouds into the grooves on the bottom cap and then flex them into place in the top cap.
Item Description Qty.
1 Front Shroud, Left 1
2 Front Shroud, Right 1
2. Press front shrouds in behind the shroud retainer grommets.
Page 23 of 34