CYBEX CI-FLY, Руководство по сборке

Страница: 13 / 36

Assembly Procedure
Assemble Frame Components
1. Install screws and washers securing the front support leg to the tower frame using an 8 mm Allen wrench.
Item Description Qty.
1 Support Leg, Front 1
2 Washer, Flat 3/8" 3
3 Screw, M10 x 1.5, 25 mm 3
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
2. Install screws and washers securing the rear support leg to the tower frame using an 8 mm Allen wrench.
Item Description Qty.
1 Support Leg, Rear 1
2 Washer, Flat 3/8" 3
3 Screw, M10 x 1.5, 25 mm 3
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
3. Install screws and washers securing the seat frame assembly to the tower frame using an 8mm Allen wrench.
Item Description Qty.
1 Seat Frame Assembly 1
2 Screw, M10 x 1.5, 25mm 8
3 Washer, Flat 3/8" 8
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
4. Pull detent pin out and slide seat post assembly down into main frame.
TIP: Break-Free CLP can be used to lubricate the seat post assembly. Spray Break-Free CLP, or apply with a cloth, to the plated
seat post.
Page 11 of 34