CYBEX Arc Trainer 625A Скачать руководство пользователя страница 15

Страница: 15 / 82

Cybex Arc Trainer 625A/625AT Owner’s Manual

625A Assembly

The words “left” and “right” denote the user’s orientation.

Read and understand all instructions thoroughly before assembling this unit. Check all items

carefully. If there is damage, see the Customer Service section of this manual for proper procedure to
return, replace, or reorder parts.

Verify correct package.

Read box label to verify the model number and voltage (optional) match what was ordered.

Lift and remove cardboard sleeve surrounding unit.

Verify paint color matches what was ordered.

Tools Required

•

Phillips screwdriver

•

Stubby Phillips screwdriver

•

7/32” Allen wrench (supplied)

•

9/16” Open end wrench (2)

Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the
equipment to ensure that there is appropriate clearance around each machine to allow for safe use
and passage.

Unpack and verify contents of carton

See content listing and diagram below for carton contents. See

Customer Service

for contact

information if any parts are missing.

Item

Quantity

Part Number

Description

Varies

Base with covers attached

Varies

Console assembly

12090-322

Foot pad

Handle, Right

Handle, Left

770A-316

Base, Accessory tray

770A-317

Cover, Top, Accessory tray

770A-318

Cover, Bottom, Accessory tray

770A-322

Cover, Rear, Top, Right

770A-323

Cover, Rear, Outer, Right

770A-324

Cover, Rear, Inner, Right

770A-319

Cover, Rear, Top, Left

770A-321

Cover, Rear, Inner, Left

770A-320

Cover, Rear, Outer, Left

770A-341

Collar, Outer, Right

770A-340

Collar, Inner, Right

Содержание Arc Trainer 625A



















































































Результаты поиска

Содержание Arc Trainer 625A

Отзывы:

Похожие инструкции для Arc Trainer 625A

Бренды по названию

Популярные бренды

CYBEX Arc Trainer 625A, Руководство пользователя

Результаты поиска

Содержание Arc Trainer 625A

Отзывы:

Похожие инструкции для Arc Trainer 625A

Бренды по названию

Популярные бренды