CYBEX 610A, Руководство пользователя

Страница: 48 / 72

Cybex Arc Trainer 610A Owner’s Manual
The power requirements for the unit are a grounded circuit rated for one of the following:
115 VAC 5%, 50/60 Hz and 15 amps; or 230 VAC 10%, 50/60 Hz. Contact your electrician to ensure
the power supply complies with local building codes.
NOTE: Do not use a ground plug adapter to
adapt the 3-prong power cord plug to a non-grounded electrical outlet.
Up to three units can be daisy-chained together for single outlet use. Use daisy chain power supply
cord supplied with unit (Part# EW600006). The daisy-chain outlet is rated 115v 50/60Hz 4A (or 230v
50/60Hz 5A outside of the United States).
Setup
and Assembly
Page 5-2
Electrical Power Requirements
+
_
+
_
! WARNING: Use extreme caution when assembling the unit. Failure to do so could result in
injury.
! CAUTION: A minimum of two people are required to assemble this unit.
Tools Required
• Phillips head screwdriver
• Torque wrench
• 5/32” Allen wrench (supplied)
• 3/16” Allen wrench (supplied) (2)
• 9/16” Open-end wrench
NOTE: The words “left” and “right” denote the user’s orientation.
1. Read and understand all instructions thoroughly before assembling the unit.
NOTE: Each step number in the assembly instructions tells you what you will be doing. The lettered
steps following each step number describe the procedure required. Do not continue with step 2
until you have carefully read all of the assembly instructions.
2. Verify you have received the correct package.
A. Read the sticker on the outside of the box and verify that the model number and voltage are
what you ordered.
3. Unpack and verify the contents of the boxes.
A. Lift up and remove the cardboard sleeve that surrounds the unit.
B. Verify that you have the color that you ordered by looking at the paint.
C. Verify that you have the correct voltage by reading the voltage sticker near the power inlet.
Assembling the Arc Trainer 610A