CYBEX 600T, Руководство по обслуживанию

Страница: 37 / 55

Cybex 600T Treadmill Service Manual
elevation assembly.
E. Lower the elevation.
F. Stop the treadmill. Turn the main power switch in the front panel to
the off (0) position.
7. Attach the motor cover.
A. Place the rear of the motor cover in the rear guide holes.
B. Lower the front end of the motor cover and install the two Phillips
head screws that hold it in place.
Lower Control Board
Tools Required
• Phillips head screwdriver
1. Turn the power off.
A. Turn the main power switch in the front panel to the off (0) position.
B. Unplug the treadmill from the power outlet.
2. Remove the motor cover.
A. Remove the two Phillips head screws that fasten the motor cover to
the frame.
B. Lift the cover from the front and remove it from the treadmill. Set the
cover and screws aside. See Figure 1.
3. Remove the lower control board bracket.
A. Locate and remove the lower board shield. Slide in out of the two
clips that hold the shield in place.
B. Unplug the cable connections plugged into the lower control board.
This includes the power in, drive motor, elevation motor, speed
sensor, brush wear indicator and display cables. See Figure 11.
C. Using a Phillips head screwdriver, loosen and remove the mounting
screw that fastens the bracket to the base. Remove the entire
bracket with its lower board.
4. Replace the lower control board bracket.
A. Position the lower control board bracket in place on the base.
B. Using a Phillips head screwdriver, attach the mounting screw that
fastens the bracket to the base.
Table of Contents
i
Read AJllnstructions
&
Warnings
ii
Important Safety Instructions
iv
About This Manual
Important Voltage Information. iv
FCC Compliance Information
. iv
V Declaration of Conformity
vii
Table of Contents
1
Safety
Warning Decals. . . . . . . . . .. 1-1
Caution Decals . . . . . . . . . .. 1-2
2
Technical Specifications
Specifications 2-1
3
Preventative Maintenance
Regular Maintenance 3-1
Running Belt Maintenance.. 3-3
4
Troubleshooting
Test Mode 4-1
LED Functions. . . . . . . . . .. 4-1
Key Functions . . . . . . . . . .. 4-2
Error Codes . . . . . . . . . . . .. 4-2
Speed Sensor Adjustments. 4-3
5
Removal & Replacement
Running Deck . . . . . . . . . . . . 5-1
Running Belt . . . . . . . . . . . . . 5-5
Front Roller . . . . . . . . . . . . .. 5-5
Drive Belt. . . . . . . . . . . . . . .. 5-5
Rear Roller. . . . . . . . . . . . . .. 5-6
Drive Motor , 5-7
Motor
Brush . . . . . . . . . . ..
5-10
Elevation Motor 5-13
Lower Control
Board
5-15
Power Cables 5-16
Une Riter 5-17
Power Switch 5-17
Power Cord Inlet 5-18
D i splay Board 5-18
Heart Rate Board 5-20
Lower Display
Board
5-21
Polar Board 5-21
Upper Display Cable 5-22
Lower Display Cable 5-24
Display Overlays 5-25
6
Diagrams
Parts Ust . . . . . . . . . . . . . .. 6-1
Exploded 6-3
600T Schematic 6-4
7
Customer Service
Contacting Service . . . . . . .. 7-1
Serial Number
&
Voltage. . .. 7-1
Return Material Authorization
(RMA) 7-1
Darnaged Parts . . . . . . . . . .. 7-2
8
Index 8-1
Page 5-15