Cybex Computer Products AV416, Инструкция по установке и эксплуатации

Страница: 17 / 56

11
Attaching Multiple AutoView 424 Units
(Please note that CIFCM cables are required for cascading.)
1. Follow steps 1-8 of the Basic Install section for each cascaded unit.
2. Plug the 25-pin “mini-D” connector of your CIFCM input cable into any
available channel port on the rear of your base AutoView 424 unit.
3. Plug the 15-pin video connector on the other end of the cable into the
port labeled on your first cascading AutoView 424 unit. Plug the
PS/2 mouse connector into the port. Plug the remaining 6-pin
miniDIN keyboard connector into the
port.
4. Repeat steps 2-3 for every cascaded AutoView 424 unit in your system.
5. Follow steps 9-11 of the Basic Install section to attach compters to the system.
6. Power-up your AutoView 424 unit(s) first, then all attached computers.
Installation
Advanced Install
CASCADING
UNIT
BASE UNIT
VGA MONITOR CABLE
PS/2 MOUSE CABLE
PS/2 KEYBOARD CABLE