Copyright © 2012 CyberPower Systems, Inc.
Mounting the inverter
6
WARNING! Fire
、
Shock and Energy Hazard
Before installing the inverter, read all instructions and cautionary markings located in this manual, on the PV array, and on the main service panel.
Mount the inverter
Make sure the supporting surface is strong enough to handle 75 kg
(160lb) for the inverter.
Step1: Fix the wall mount bracket
Use the attached screws / Self-tapping screws: M6*20L (5pcs)
Step2: Put the inverter on the wall mount bracket
Step3: Make sure the host of inverter on the incision of
the wall mount bracket
Step4: Move the inverter from right to left side, and
make sure the hole is locked with wall mount bracket.
Step5: Use cable ties, and fix the inverter with wall
mount bracket.
WARNING! Equipment damage Shock hazard
If your installation location requires that you drill additional conduit holes
into the bracket, ensure that there are no metal shavings left inside the
unit. These could cause a short circuit when unit is operating.
!
!
