User Manual 25 / 43 CPS Mini Central series
AC Power Cable requirements:
Model
Diameter(mm)
Area(mm²)
Available wire gauge (AWG)
CPSPV7000ETL-S
2.05~4.11
4~16
12~6
CPSPV8000ETL-S
2.05~4.11
4~16
12~6
CPSPV9000ETL-S
2.05~4.11
4~16
12~6
CPSPV10000ETL-S
2.05~4.11
4~16
12~6
CPSPV11000ETL-S
2.05~4.11
4~16
12~6
CPSPV12000ETL-S
2.05~4.11
4~16
12~6
CPSPV15000ETL-S
2.05~4.11
4~16
12~6
Please do not use single-core wire cable.
There are three types of AC connector for CPS Mini Central series On-grid Solar Power Generating System.
Please follow the instructions corresponding to the parts we offer you.
AC terminal :
1
The AC side terminals of the On-grid Solar Power Generating System are like the following figure, it is
clear to confirm that ‘L1, L2, L3’ represents three live line output, ‘N’ represents neutral line and is
grounding line.
2
Connect five standard cables into relevant terminals. The five cables should be put through the protection
shell, as figure below.
3
Fasten the protection shell onto the bottom of the On-grid Solar Power Generating System, make sure the
four screws are tightened, the completed appearance is like the below figure.
Fig6.1
