User Manual 36 / 43 CPS Mini Central series
Setting RS485 com address
Single knock on the enclosure until the text line cycles show “Com Address”. Refer
to Fig 9.12.
Double knock the enclosure to start edit the low digits in number text "00
1
". You
can to change it with more single knock on the enclosure shown as Fig 9.13.
If you want to set the address with higher digits, double knock to let the
higher number text “0
2
0” flashing shown as Fig 9.14.Usually, the inverter COM
address is within 0-32. Thrice knock to confirm the com address you have chosen
shown as Fig 9.15. Forth knock to quit the setting menu.
Fig 9.14
Fig 9.15
Fig 9.16
Fig 9.17
Setting date and time
Single knock on the enclosure until the text line cycles to the time refer to Fig
9.16.
Double knock to start edit the year "2012", and the two lower number "12"
will flash, then single knock to change it. Refer Fig 9.17.
Double knock to edit the month "01", and it will flash, then single knock to
change it.
Repeat same to day and the time settings. Thrice knock to confirm the
date and time you have chosen shown as Fig 9.18. Forth knock to quit the setting
menu.
