CyberData InformaCast Enabled 011406, Руководство по эксплуатации

Страница: 67 / 133

Operations Guide 931281I CyberData Corporation
2. On the SIP page, enter values for the parameters indicated in Table 2-17 .
Note The question mark icon ( ) in the following table shows which web page items will be defined
after the Toggle Help button is pressed
.
Table 2-17. SIP Page Parameters
Web Page Item Description
SIP Settings
Enable SIP Operation When enabled, the device will transmit, receive, and process SIP messages according
to the configured SIP settings below.
Get SIP Params from InformaCast When enabled, the device will get its SIP configuration parameters from the
InformaCast server. This will override the manually entered/auto provisioned SIP
configuration.
SIP Transport Protocol Choose the transport protocol for SIP signaling. This will affect all extensions,
including the Nightringer. Default is UDP.
TLS Version Choose the TLS version for SIP over TLS. Modern security standards strongly
recommend using TLS 1.2.
Verify Server Certificate When enabled, the device will verify the authenticity of the server during the TLS
handshake by its certificate and common name. The TLS handshake will be aborted if
the server is deemed to be inauthentic and SIP registration will not proceed.
Register with a SIP Server When enabled, the device will attempt to register to the configured SIP Server(s) on
this page. To configure the device to send and receive point-to-point SIP calls, enable
SIP Operation and disable Register with a SIP Server (see Section 2.3.7.1, "Point-
to-Point Configuration" ).
Use Cisco SRST When enabled, the backup servers are handled according to Cisco SRST (Survivable
Remote Site Telephony). It is required for use in clustered Cisco Unified
Communications Manager topologies.
Primary SIP Server Enter the SIP server address as an IPv4 address in dotted decimal notation or a fully
qualified domain name. This parameter also becomes the host portion of the SIP-URI
for the device's extension on the primary SIP server. This field can accept entries of
up to 255 characters in length.
Primary SIP User ID Specify the SIP User ID for the Primary SIP Server. This parameter becomes the user
portion of the SIP-URI for the device's extension on the primary SIP server. Enter up
to 64 alphanumeric characters.
Primary SIP Auth ID Specify the Authenticate ID for the Primary SIP Server. This parameter is required for
SIP registration authentication. Enter up to 64 alphanumeric characters.
Primary SIP Auth Password Specify the Authenticate Password for the Primary SIP Server. This parameter is
required for SIP registration authentication. Enter up to 64 alphanumeric characters.
Backup SIP Server 1 Enter the backup SIP server address as an IPv4 address in dotted decimal notation or
a fully qualified domain name. This parameter also becomes the host portion of the
SIP-URI for the device's extension on the backup SIP server. This field can accept
entries of up to 255 characters in length.
Backup SIP User ID 1 Specify the SIP User ID for the first backup SIP Server. This parameter becomes the
user portion of the SIP-URI for the device's extension on the first backup SIP server.
Enter up to 64 alphanumeric characters.
Backup SIP Auth ID 1 Specify the Authenticate ID for the first backup SIP server. This parameter is required
for SIP registration authentication. Enter up to 64 alphanumeric characters.
Backup SIP Auth Password 1 Specify the Authenticate Password for the first backup SIP server. This parameter is
required for SIP registration authentication. Enter up to 64 alphanumeric characters.