Setting Up the V2 Paging Server
Configuring the V2 Paging Server
CyberData Corporation
930367H
Operations Guide
28
2. On the
PGROUPS Setup
page, enter values for the parameters indicated in
Table 2-10
.
3. After changing the parameters, click
Save Settings
.
2.4.9 Operating the Paging Server
• When you call to make a page, the V2 Paging Server generates a tone over the phone.
• When you hear this tone, enter the two-digit code for the zone that you want to page.
• The V2 Paging Server establishes a connection to a zone.
• The V2 Paging Server generates another tone to the phone.
• When you hear this tone, you can begin speaking.
Note
For
page-all
, you simply configure
all
speakers with a particular multicast address and port
number combination, which represents one of the 100 zones that the paging server will
support initially. Each speaker can still be part of 100 other paging zones in addition to the
one
page-all
zone.
Table 2-10. PGROUPS Setup Parameters
Web Page Item
Description
Bypass DTMF
When selected, bypassing the DTMF will result in all calls
being relayed to PGROUP 0.
#
Shows the paging group number.
Address
Enter the IP address of the PGROUP.
Port
Enter the port number of the PGROUP.
Name
Enter a name for the PGROUP.
TTL
The TTL field allows you to adjust the TTL. TTL is "time to
live" and it describes how many networks (routers) a packet
will go through before it is discarded. For more information,
see
Appendix C, ”How to Use the Multicast Extensions
.
Lineout
The Lineout field determines whether or not the V2 Paging
Server will play audio out of the line-out port in addition to
forwarding it to the Pgroup.
