Installing the SIP Paging Amplifier
SIP Paging Amplifier Setup
Operations Guide
931156K
CyberData Corporation
26
2.3 Configure the SIP Paging Amplifier Parameters
To configure the SIP Paging Amplifier online, use a standard web browser.
Configure each SIP Paging Amplifier and verify its operation
before
you mount it. When you are
ready to mount an SIP Paging Amplifier, refer to
Appendix A, "Mounting the Amplifier"
for
instructions.
2.3.1 Factory Default Settings
All SIP Paging Amplifiers are initially configured with the following default IP settings:
When configuring more than one SIP Paging Amplifier, attach the SIP Paging Amplifiers to the
network and configure one at a time to avoid IP address conflicts.
Parameter
Factory Default Setting
IP Addressing
DHCP
IP Address
a
10.10.10.10
Web Access Username
admin
Web Access Password
admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
Table 2-8. Factory Default Settings
a. Default if there is not a DHCP server present.