Installing the SIP Paging Amplifier
SIP Paging Amplifier Setup
Operations Guide
931156K
CyberData Corporation
21
2.2.10 Confirm Operation
After connecting the SIP Paging Amplifier to the 802.3af compliant ethernet hub, use the LEDs on
the SIP Paging Amplifier face to confirm that the SIP Paging Amplifier is operational and linked to the
network.
LED
Color
Function
Power (PWR)
BLUE
/
GREEN
The power LED is
GREEN
in low power mode (
802.3af) and a
BLUE
during high power mode (
802.3at).
The power LED will
blink during a boot up or a phone call.
Status
GREEN
After supplying power to the device, a steady
GREEN
Status
LED
illuminates.
After about 20 seconds, the
GREEN
Status
LED will blink fast to
indicate that the device is acquiring an IP address and attempting to
autoprovision. The
GREEN
Status
LED will turn off thereafter until
the device has finished booting. When the device has fully booted,
the
GREEN
Status
LED will turn on solid to confirm the device is
operational.
The status LED will blink during a page when it is online.
Speed (SPD)
AMBER
The
Speed (SPD)
LED illuminates
AMBER
for a 100Mb link or is off
for 10MB when the network link to the device is established.
Link/Activity (Link/Act.)
GREEN
The
Link/Activity (Link/Act.)
GREEN
LED blinks to indicate
network traffic.
Figure 2-17. SIP Paging Amplifier LEDs
Table 2-7. SIP Paging Amplifier LEDs
SPD
PWR
Link/Act
Status
Volume
Power (PWR)
LED
(
BLUE
/
GREEN
)
Speed (SPD)
LED
(
AMBER
)
Link/Activity (Link/Act.)
LED
(
GREEN
)
Status LED
(
GREEN
)
