J o y s t i c k s
www.cyber-tech.net
General Dimensions
mechanical
JS-500-HD series
JS-500-HD Mounting Instructions
Center hole cutout = 0 3.63
Mounting screw holes = 0 0.25
Panel install (bottom mount only) drill .25 pass through holes
Torque rate = 30 IN-LBS
Recommend the use of Loctite 272
OVER TIGHTENING OF IMPROPER TORQUE SPECIFICATION
MAY RESULT IN STRIPPING OR SNAPPING THE SCREW.
If you have a special installation
problem or concern, please call the
technical staff at Cyber-Tech, Inc. for
assistance. Thousands of successful
installations of our controls have been
made and we will be happy to share
our twenty years of expertise to help
you make your installation a success.
For all bottom-mount joysticks,
Cyber-Tech, Inc. recommends that
edges of all openings be deburred
and cleaned to ensure proper seal.
(Please refer to Figure 4A for cutout
dimensions.)
All of Cyber-Tech, Inc.’s Handy-Grips
and Ergo-Grips will fit through the
specified cutout hole except the
1801-RB which require a split-mount.
Split-mounts consist of removing the
handle from the joystick base, mount-
ing the joystick base to the panel and
then remounting the handle to the
joystick base.
Figure 4A
BOTTOM MOUNTING PATTERN
-X
+X
+Y
-Y
101.6 mm
4.00 in
Joystick Dimentions
101.6 mm
4.00 in
+X
84.12 mm
3.312 in
84.12 mm
3.312 in
4x.25
(#10/32 THREAD)
Ø
.92.20 mm
3.63 in
Joystick Dimentions
with Boot Seal Overhang
139.7 mm
5.50 in
2.5 in Boot Seal Overhang
Содержание JS-500-HD Series
Страница 5: ......
