User's Manual
V34bis Fax-modem - AJ 2885 P
AJ 2885 P - Page 41
+FRH
Receive T30 command mode
+FCERROR Error code
7.4.5. Service Class 2 Command Set
The following AT commands control the operation of a class 2 modem/fax:
+FCLASS
Service class identification and control
+FMDL Fax-modem
model
+FMFR Fax-modem
manufacturer
+FREV Fax-modem
checkup
+FBUG Frame
report
+FAA Automatic
answer
+FBOR
Data bit order
+FDCC
Fax-modem capability selection
+FDIS
Capability initialization for transmission
+FLID
Identification selection of the fax-modem
+FCON
Remote fax detection
+FCIG
Identification of called subscriber by CIG
+FCSI
Identification of called subscriber by CSI
+FTSI
Identification of calling subscriber by TSI
+FDTC
Called fax return capability - DCS frame
+FDCS
Discussed capability for process - DCS frame
+FHR
Content of received frame
+FHT
Content of transmitted frame
+FBUF? Buffer
state
+FDT
Fax message transmission
+FPTS
Page transmission result
+FDR
Fax message reception
+FCFR
Reception mode confirmation
+FPTS
Remote reception status
+FET
End of page status
+FHNG
End of procedure status
+FAXERR Error
code
7.5. General
characteristics
Dimensions :
Length: 260 mm,
Width: 170 mm,
Height: 35 mm.
Weight: 0,7kg.
External power supply module: 230V/50Hz.
Power consumption: 25mA.
Operating temperature: 0 to 50°C.
Relative humidity: 0 -> 90% non-condensing.