User's Manual
V34bis Fax-modem - AJ 2885 P
AJ 2885 P - Page 3
Important Information
Conformity Statement EC
Manufacturer name:
CXR
Manufacturer address:
rue de l'Ornette - 28410 ABONDANT – France
Product name:
AJ 2885 P
This equipment was design to comply with the ETSI – CTR.21 standard. It is intended to
connect to the Public Switched Telephone Network. However, since differences exist between
networks from a country to another or from an operator to another, this conformity does not
constitute an absolute guaranty for an optimum operation of the equipment in any situation of
use. In any case of problem, you should first contact your provider of this equipment.
The CE mark attests the conformity of this equipment to the main requirements of the R&TTE
1999/05/CEE European community :
For the user’s safety, in compliance with the 73/23/EEC European Directive, as per
EN.60950 standard
For electromagnetic compatibility, in compliance with the 89/336/EEC European
Directive, as per EN.61000-6-1 and EN.61000-6-3 standards.
CXR states that this equipment is manufactured in compliance with the Annex II of the
1999/05/EEC European Directive.
Safety Instructions
The following accesses are referenced as SELV (Safety Low Voltage] in conformity with
EN.60950 standards:
•
5 VDC Input of the AJ 2885P-xxV desktop unit
•
48 VDC Input of the AJ 2885 P - xxC desktop unit
•
Terminal: V24 - RS232 data port
The following access are referenced as TNV (Telecommunication Network Voltage] in
conformity with EN.60950 standards:
•
Tel-Line : PSTN access as a TNV-3 interface,
•
Lease : Leased line access as a TNV-2 interface.
Desktop AJ 2885 P - xxV:
The wall mount power supply adapter is the main switching element. Thus this plug must be
installed close to the equipment and provided easy access.
To totally disconnect the equipment from the supply source we recommend you disconnect the
power cord from the mains wall outlet. In order to comply with the safety regulations, it is
imperative to use the accessories (power supply and cables) provided with the equipment.
When access to the inside of the modem is necessary, it is imperative to disconnect the power
adapter from the mains outlet.
Desktop AJ 2885 P – xx i :
The power cord is the main switching element. Thus the mains outlet must be installed close to
the equipment and provided easy access. In order to comply with the safety regulations, it is
imperative to use the accessories (power supply and cables) provided with the equipment.
When access to the inside of the modem is necessary, it is imperative to disconnect the power
cord from the mains outlet. This is a Class 2 product as shows the symbol close to the mains
socket; its earth connection is for functional purpose only.
