User's Manual
V34bis Fax-modem - AJ 2885 P
AJ 2885 P - Page 38
6.4.2. Dial number request
callback.
The remote user may provide the callback
number after password control.
Example:
HERE
THERE
N 3132
N 4142
ATS0=2
ATS0=2
AT%SB1
AT%SA1
AT&Z3:ICI:MOBILE:::
ATD4142
Dialing
Training
Password?
« MOBILE »
Callback number ?
3132
Disconnect
Dial (3132)
Training
Modems are connected
6.5. Inactivity
password
The modem asks for a password when no data passes through it for a presented delay. If this
password matches the operator or supervisor password stored in memory then the modem will
reconnect otherwise it will drop the line.
S32: number of minutes of inactivity that will start the password request.
S96: number of seconds that the modem will wait for the password.
AT%ST 0/1: number of password trials (0: one trial / 1: three trials).
AT%In: inactivity is detected if:
n=0: no detection, i.e. feature is disabled.
n=1: detects transmitted data inactivity.
n=2: detects received data inactivity.
n=3: detects both received and transmitted data inactivities.
AT%PS: SUPER:SUPER: stores the supervisor password, (SUPER as an example).
AT%PO: OPE:OPE: stores the operator password (OPE as an example).
