P.O. Box 749 Peekskill, NY 10566 TEL: (845)737-7009 Fax: (845)737-0426 Web: www.compuvideosystems.com
Terminating/Looping Switchers:
The CLTS-4 and CLTS-8 Looping/Terminating switchers are supplied with removable termination’s. To
activate the loop-thru feature you must:
First, disconnect the power and then remove the cover with the two side screws.
CLTS-4
At the rear of the upper row of BNC connectors you will see two resistors soldered together as shown in figure
below.
To remove the 75 ohm termination you must cut 1 lead of the resistor that is soldered to the other. This
removes the termination on the one input. Each input has it’s own resistor and must be cut if the looping
feature is to be used on that input.
Cut Here
Violet, Green, Black bands
