Other possible malfunctions and possible solutions:
The device frequently fails to measure the blood
1. Fit the cuff correctly on the arm.
pressure values, or the values measured are too
2. Before starting a measurement
low (too high).
make sure that the cuff is not fitted
too tightly. Ensure clothing is not
exerting pressure on the arm above
the measuring position. Take off
articles of clothing if necessary.
3. Measure blood pressure again in
complete peace and quiet.
Every measurement results in different values,
• Blood pressure changes
although the device functions normally and normal
continually. Your readings may be
values are displayed.
accurate. Consult your doctor.
The blood pressure values measured differ form
• Record the daily development of the
those measured by the doctor
values and consult your doctor
about them.
• Anxiety during a doctor visit can
result in higher readings.
11
Malfunction
Remedy
The display remains blank when the instrument
1. Check battery polarity
is switched on although the batteries are in place.
and correct if necessary.
2. If the display is unusual, remove
the batteries and insert
new batteries.
The pressure does not rise although you
• Check the connection of the cuff
are pumping the inflation ball.
tube and connect properly if
necessary.
Содержание #271243
Страница 16: ......
