Illustration For Use
Illustration For Use
14
Illustration For Use
Figure 3
X
√
3. The thermometer is ready for testing again once an ear mark
displays on the LCD. A waiting period of 20 seconds between
testing is recommended to avoid excessive cooling of the skin.
4. The thermometer will shut off automatically after 60 seconds
of inactivity. To prolong battery life, press and hold
to turn the unit off.
Memory
Button
13
12
11
To measure object temperature:
1. Aim the thermometer at the center of the object you want to
measure with a distance less than 5cm.
2. Press the
Test Button
to turn on the thermometer,
you can take
the object temperature after hearing two beep sounds.(see figure 4)
Remarks:
This mode shows the actual, unadjusted surface temperatures,
which is different from the body temperature.
then press and
hold
Setting Button
to switch to object mode,
If error messages appears, it means the thermometer is not ready for
measurement.
Figure 4
How to change the ear mode and object mode:
You can press and hold
Setting Button
to switch the mode between
ear mode and object mode.
1. Press the
Test
, the display is activated to show all
segments.
Button
After self-checking Figure 2 appears on the display
screen with beeps, so you can start a new measurement. If error
messages appears, it means the thermometer is not ready for
measurement.
2. Insert the probe along the ear canal as deep as possible into the
ear as depicted in Figure 3. Then press the
Test BUTTON
once
to start the measurement. A long beep will sound approximately
1 second after the
Test BUTTON
is activated. This signals the
end of the process as results are displayed on the LCD screen.
To measure ear temperature:
Figure 2
Real Time Clock Setting
Set the year
Press and release the
Test
to advance
one year until the correct year appears.
After the year is set, press
Setting Button
, the Month
figure will appear
.
④
Button
Set the month
Press and release the
Test
to advance
one month until the correct month appears.
After the month is set, press
Setting Button
, the Date
figure is flashing automatically
.
⑤
Button
Set the date
Press and release the
Test
to advance
one day until the correct month appears.
After the day is set, press
Setting Button
to exit the
setting mode.
⑥
Button
How to change temperature unit :
You can press
Setting Button
to change the unit between
℃
and
℉.
