CVE JC300, Руководство по эксплуатации, Страница: 5 / 31

Page 5
BEFORE DELIVERING THIS MACHINE, the manufacturer or their authorised
representative must carry out a pre-delivery check.
Once the first 30 hours of service have elapsed, we recommend booking a post-
sales inspection with the manufacturer or their representative to ensure the
correct functioning of the machine.
THIS MACHINE IS DESIGNED EXCLUSIVELY for use as a wood or metal post
driver in terrains subject to penetration via impact, such as agricultural, forestry,
garden, beach or other terrains. However, it may also be used with posts made
from other materials, such as thermoplastics and composites, though this is
subject to consultation and acceptance by the manufacturer.
The manufacturer shall not be held accountable for any consequences or
damages derived from an incorrect use of the machine. In this case, the user
shall be held accountable for any and all risks incurred.
Similarly, a correct usage according to the machine’s characteristics implies the
strict observance of all the manufacturer’s instructions in terms of use,
maintenance and repair.
The sheathing of posts is carried out manually by two operators, from the frontal
section of the machine and with the post in a quasi-horizontal position, resting on
the ground. In order to place the post and machine in a vertical position, the post’s
lower tip must be pivoted.
This machine may ONLY BE HANDLED, maintained or repaired by individuals
who are aware of the peculiarities and risks involved, and that have been briefed
on the corresponding safety procedures (accident prevention). Accident
prevention and any other acknowledged regulations on health and safety must
be observed at all times. The manufacturer will not be held responsible for any
modifications introduced in the machine without their prior, express authorisation.
If you are not the machine’s original proprietor, you must contact the
manufacturer to communicate the unit’s serial number. This will allow the
manufacturer to notify you of any product improvement programmes.
S
AFETY INFORMATION
This user documentation contains WARNINGS, CAUTIONS and NOTICES about
how to use the product with safety. Please find the definitions below.