Page 11
Part
Function
Part
Function
1
Starter handle
6
Exhaust
2
On/Off switch
7
Throttle trigger
3
Fuel tank
8
Recoil starter
4
Fuel fill cap
9
Oil fill/Dipstick
5
Handles
10
Hammer cover
D
RIVING A POST
The install operation is carried out by placing the post in the hammer cover,
securing the machine with both hands in a vertical or slightly tilted position and
squeezing the throttle trigger with the right hand.
The motor does not need to be stopped once the post has been driven – the
centrifugal clutch allows for letting go of the percussion mechanism once the
motor is idle.
The post dimensions must be compatible with the lengths and diameters
indicated in this manual.
The depth the post must be driven at is linked to the kind of terrain, the material
the post is made of and the geometry of the post’s tip.
W
ORK CYCLES
The post driver operates with
“manual”
and
“manual load”
work cycles.
1.4 Control and evaluation
The control of the Clavaestacas JC300’s different safety mechanisms and
elements is carried out by visual inspection and by following the guidelines
detailed in this manual.
2 Safety instructions
This chapter details issues such as safety compliance, safety labelling, general
safety precautions, emergency procedures, power source cuts and machine
recycling.
2.1 Safety precautions
I
NTRODUCTION
The Clavaestacas JC300 is powered by the combustion of petrol in an alternative
motor. It is equipped with a petrol deposit and an exhaust system that conducts
and attenuates the gases produced by the combustion to minimise acoustic
impact and to distance them from the work area.
Содержание JC300
Страница 2: ...Page 2...