Cutech 40180H-CT, Руководство пользователя, Страница: 23 / 35

23
OPERATIONS (cont.)
DIRECTION OF GRAIN
Avoid feeding work into the jointer against the grain. The result will be chipped and splintered
edges. Feed with the grain to obtain a smooth surface. SEE FIG 19.
FIG 19
The jointer can be set
to cut any depth from a very thin shaving to 1/8” deep. The pointer on the
scale is to indicate the depth of cut. To adjust the depth of cut, loosen lock knob and turn adjusting
knob clockwise to lower and counterclockwise to raise the infeed table until the infeed table is at
the desired position. Retighten lock knob. SEE FIG 20.
FIG. 20