Custom Works Outlaw 0720, Инструкция по эксплуатации

Страница: 7 / 16

Spur Gear Assembly Spur Gear Assembly
Spur Gear Assembly Spur Gear Assembly Spur Gear Assembly
5245 Qty 1
5-40 Locknut
1:1 -Parts for
Bag G 1:1
2228 Qty 1
Spacer 2228 Qty 1
Slipper Eliminator 4881 Qty 1
81T 48P Spur Gear
5252 Qty 2
4-40 x 1/4 BH Screw
- Press the 2228 Slipper Eliminator onto the Top
Drive Shaft so that the Roll Pin keys into the
grooves.
- Secure the assembly to the Top Shaft with the
2228 Spacer and the 5245 Locknut. Do NOT
overtighten the nut on the Top Shaft!
- Mount the 4881 Spur Gear so the flat side faces
AWAY from the transmission. Secure using (2)
5252 Screws.
2228
4881
5252
2228
5245
Transmission Mount Transmission Mount Transmission Mount Transmission Mount Transmission Mount
1:1
-Parts for
Bag I
3229 Qty 1
Set Screw
1:1
3308 Qty 1
Transmission Brace
1:1
3229 Qty1
Short Body Post
3229 Qty 1
Post Collar 1202 Qty 1
Trans Spacer
5264 Qty 2
4-40 x 1/2 FH Screw 5253 Qty 4
4-40 x 3/8 FH Screw
- Attach 3229 Body Post to 3308 Trans Brace using 3229 Screw.
- Slide 3201 Post Collar onto the Body Post and secure using 3229 Set Screw.
- Mount the 1202 Trans Spacer to the Chassis using the 5262 Screw where shown.
- Secure the Trans to the Chassis using (2) 5264 Screws thru the 1202 Trans Spacer as shown.
- Attach the 3308 Trans Brace to the Trans and Rear Bulkhead using 5253 Screws.
- Mount the Trans Brace to the Trans and Rear Bulkhead using 5253 Screws.
- NOTE: Align the dogbone shafts into the outdrives of Trans as you mount the trans!
3229 Qty 1
8-32 x 1/2 FH Screw
1:1
Bag G Bag G
Bag G Bag G Bag G
Bag H Bag H
Bag H Bag H Bag H
5262 Qty 1
4-40 x 1/4 FH Screw
3229
3229
5264
5253
1202
5262
- NOTE: Align the dogbone shafts into the outdrives
of Trans as you mount the trans!
3308
3308