Custom Works Outlaw 0720, Инструкция по эксплуатации

Страница: 10 / 16

Cage Bag Cage Bag
Cage Bag Cage Bag
Cage Bag
Cage Assembly Cage Assembly Cage Assembly Cage Assembly Cage Assembly
3421 Qty 2
Wing Slide Bushing 3235 Qty 2
Main Cage Half
-Parts for
Step #1
&
Step #2
3233 Qty 1
Front Bumper
3233 Qty 2
Rear Bumper
-Parts for
Step#3
&
Step#4
3233 Qty1
Bumper Connector
3235 Qty 2
Upper Cage Brace
- Mount the (2) 3233 Rear Bumpers together using 5253
Screws and the 3233 Bumper Connector.
-Attach the Bumper Assembly to the Rear Bulkhead using
5255 Screw into the upper bumper and 5254 Screw into the
lower bumper as shown.
STEP #1
5253 Qty 2
4-40 x 3/8 BH Screw
1:1 1:1
5254 Qty 6
4-40 x 1/2 BH Screw
1:1
5255 Qty 4
4-40 x 5/8 BH Screw
3232 Qty 1
Nerf Bar L & R 3232 Qty 1
Nerf Support L & R
5280 Qty 2
Hole Head Screw SHORT 5279 Qty 2
Hole Head Screw LONG 5278 Qty 2
4-40 x 1” SH Screw 5274 Qty 4
4-40 x 1/2 SH Screw
1:1 1:1
1:1
1:1
- Assemble the Nerf Bar and Nerf Bar Support using
5254 Screw.
NOTE: Right and Left Nerf Bars and Supports come in
the cage kit. Shown is the RIGHT assembled part.
When using the correct Support with the Nerf Bar, the
bottom foot of the Support and the short leg of the
Nerf Bar will be parallel.
STEP #3
Parallel to
one another!
5254
STEP #2
5253
3233
5253
3233
3233
5255
5254
- Mount the 3239 Front Cage mount to the chassis
using 5262 Screws.
3239 Qty1
Front Cage Mount
1:1
5262 Qty 2
4-40 x 1/4 FH Screw
5262
5262
3239
1:1
5264 Qty 3
4-40 x 1/2 FH Screw