Custom Engineering TG1260 series, Руководство пользователя

Страница: 80 / 100

2. PRINTER FUNCTIONS
2-63
TG1260/2460
[Notes] • The printer waits until all the paper movement commands have been completed
before executing total cut
[Default]
[Reference]
[Example]
L y H y L x H x n A F $ B 1 $
[Name] Print graphic bank ( 448
×××××
1170 dots).
[Format] ASCII ESC { } n xH xL yH yL
Hex 1B FA n xH xL yH yL
Decimal 27 250 n xH xL yH yL
[Range] 1
≤
n
≤
2
0
≤
xH , xL , yH , yL
≤
255
[Description] Prints the graphics bank from flash. n selects the bank as follows:
n n u F n o i t c
1 1 o g o l k n a b h s a l f t n i r P
2 2 o g o l k n a b h s a l f t n i r P
xL + xH
×
256 specifies the starting dot line ( 1
÷
1170 ).
yL + y H
×
256 specifies the number of lines to print.
[Notes] • If ( xL + ( xH
×
256)) > 1170 the printer does not execute the command.
• Se ( xL + ( xH
×
256 ) + yL +( y H
×
256 ))> 1170 the printer only prints 1170 - xL + ( xH
×
256 ) +1 dotlines.
[Default]
[Reference]
[Example] To print logo1 from flash bank dotline 100 to dotline 299, send:
$1B $FA $01
$00 $64 $00 $C7
4 3 $ 0 C $ C 1 $
[Name] Total cut and automatic paper moving back .
[Format] ASCII FS { } 4
Hex 1C C0 34
Decimal 28 192 52
[Description] This command enables cutter operation and executes a total cut and automatic paper
moving back; if there is no cutter, a disabling flag is set any subsequent cutting
commands will be ignored.
[Notes] • The printer waits until all the paper movement commands have been completed
before executing total cut
[Default]
[Reference]
[Example]
n 9 4 $ D 1 $
[Name] Transmit printer ID.
[Format] ASCII GS I n
Hex 1D 49 n
Decimal 29 73 n
[Range] 1
≤
n
≤
3, 49
≤
n
≤
51
[Description] Transmits the printer ID specified by n as follows: