Custom Engineering TG1260 series, Руководство пользователя

Страница: 53 / 100

2. PRINTER FUNCTIONS
2-36
TG1260/2460
[Default]
[Reference]
[Example]
D 0 $
[Name] Print and line feed
[Format] ASCII CR
Hex 0D
Decimal 13
[Description] This command prints the data in the buffer.
[Notes] • This command sets the print position at the beginning of the line.
[Default]
[Reference] $0A
[Example]
F 0 $
[Name] Ignore CR
[Format] ASCII SI
Hex 0F
Decimal 15
[Description] After this command the CR code is ignored.
[Notes] • To put the CR code back into operation, reset the printer.
[Default]
[Reference]
[Example]
1 1 $
[Name] Graphic mode DP24/40
[Format] ASCII DC1
Hex 11
Decimal 17
[Description] Prints in graphic mode like the DP 24/40.
The command $11 enables the DP24-40 printer graphic mode, i.e. to print in graphic
mode, transmit the command $11 at the beginning of each line. One line for the DP24-
40 printer (24 column model) corresponds to 44 horizontal dots divided into 24 6-dot
blocks. For the DP24-40 printer (40-column model) one line corresponds to 240
horizontal dots divided into 40 6-dot blocks.
[Notes] The size of the graphic dot and the number of dots per line vary depending on the
number of columns.
To obtain a graphic printout, enter the command $11 at the beginning of each line. The
graphic configuration byte format is as follows:
X R P6 P5 P4 P3 P2 P1
D7D6 D5 D4 D3 D2 D1 D0
where:
X is not utilized (we recommend 0);
R must be set at 1;
P1, P6 are the data of the graphic dots (1 prints, 0 does not print).
The P6 bit of the string of dots transmitted, is printed on the left and the others (P5, P4,