Custom Engineering TG1260 series, Руководство пользователя

Страница: 64 / 100

2. PRINTER FUNCTIONS
2-47
TG1260/2460
[Default]
[Reference]
[Example]
C 0 $ D 1 $
[Name] Print the buffer contents.
[Format] ASCII GS FF
Hex 1D 0C
Decimal 29 12
[Description] Prints contents of buffer characters and executes a line feed.
Sets the printing start position at left margin.
[Notes]
[Default]
[Reference] $0A
[Example]
A 3 $ D 1 $
[Name] Start / end macro definition.
[Format] ASC II GS :
Hex 1D 3A
Decimal 29 58
[Description] Starts or ends macro definition.
[Notes] • Macro definition starts when this command is received during normal operation.
• When the command
$1D $5E is received during macro definition, the printer ends the
macro definitions and clears all definitions.
• Macro not defined when the power is turned on.
• The defined contents of the macro are not cleared by the command
$1B $40 .
Therefore, $1B $40 can be included in the contents of the macro definitions.
• If the printer receives the command $1D $3A again immediately after previously
receiving $1D $3A , the printer remains in the macro undefined state.
• The contents of the macro can be defined up to 1024 bytes. If the macro definition
exceeds 1024 bytes, the excess data is not not stored.
[Default]
[Reference] $1D $5E
[Example]
m n 0 3 $ 3 4 $ D 1 $
[Name] Set counter print mode.
[Format] ASCII GS C 0 n m
Hex 1D 43 30 n m
Decimal 29 67 48 n m
[Range] 0
≤
n
≤
5
m = 0, 1, 2, 48, 49, 50
[Description] Selects a print mode for the serial number counter.
•
n specifies the number of digits to be printed as follows:
when n = 0, the printer prints the actual digits indicated by the number value.
when n = from 1 to 5, this command sets the number of digits to be printed.
• m specifies the printing position within the entire range of printed digits, as follows: