Custom Audio Electronics VKP112, Руководство пользователя

Страница: 16 / 48

•
Speed/Quality
: Normal D , Draft or High Quality.
•
Paper Autoload
: Deactivated D or Activated.
•
Reset buffer
: Not implemented, At paper end D .
•
Print density
: Normal D , Light, Very light, Dark, Very dark, Double copy.
General notes:
1) The parameters marked with the symbol D are the default values.
2) Settings remain active even after the printer has been turned off.
The settings made are stored in EEPROM (nonvolative memory). During power-up, if both the LINE FEED
and FORM FEED keys are held down, the printer enters con
fi guration mode and prints-out the setup report;
it will remain in standby until a key is pressed or characters are received through the communication port
(see Hexadecimal dump).
When the LINE FEED key is pressed, the printer skips the setup mode and terminates the Hexadecimal
dump function.
When the FORM FEED key is pressed, the printer enters the parameter entry mode.
1.4 HEXADECIMAL DUMP
This function is used to diagnose the characters received through the communication port; the characters are
printed out both as hexadecimal codes and ASCII codes. Once the self-test routine has
fi nished, the printer
enters Hexadecimal Dump mode. The printer remains in standby until a key is pressed or characters are re-
ceived through the communication port. For every 10 characters received, the hexadecimal and correspond-
ing ASCII codes are printed out (if the characters are underlined, the receive buffer is full).
Shown below is an example of a Hexadecimal Dump:
HEXADECIMAL DUMP
Hexadecima
l dump fun
ction 0123
456789abcd
efghijklmn
opqrstuvwx
yz
48 65 78 61 64 65 63 69 6D 61
6C 20 64 75 6D 70 20 66 75 6E
63 74 69 6F 6E 20 30 31 32 33
34 35 36 37 38 39 61 62 63 64
65 66 67 68 69 6A 6B 6C 6D 6E
6F 70 71 72 73 74 75 76 77 78
79 7A
(Fig.1.4)
1. INSTALLATION AND USE
1-4 VKP112
User Manual