Custom Audio Electronics VKP112, Руководство пользователя

Страница: 11 / 48

• De fi nition of function macros for automatic operation repetition.
• Internal programmable counter.
• Graphic print mode.
• Print density.
• 3 programmable logos: (832 x 314 dots).
• Paper cutter.
• Positionable paper roll holder.
• Plastic paper outfeed slot.
PRINTER DESCRIPTION
The VKP112 printer is comprised of a metal frame, paper roll holder, printing mechanism and cutter.
The following keys (see fi g.2) are located on the control panel: LF LINE FEED key (1), FF FORM
FEED key (2), POWER ON Led (3), NEAR PAPER END Led (4) and STATUS Led (5).
Near paper end
Status
Power on
VKP112 printer
1
2
5
4
3
• LINE FEED key When the LINE FEED key is pressed, the printer advances the paper
so that it may be inserted manually in the printing mechanism. During
power-up, if the LINE FEED key is held down, the printer will perform
the FONT TEST routine. If it has the version with chinese simpli
fi ed
font GB2312 (option 0104) at the end of the FONT TEST is printed all
characters set (about 7000).
• FORM FEED key If the FORM FEED key is enabled, when it is pressed the printer advances
the paper the number of increments programmed in the Eeprom. If the
FORM FEED key is not enabled and the printer is in Custom Emula-
tion mode, when the key is pressed, the code $0C is transmitted on the
RS232 serial line. This function may be modi
fi ed by the $1B $3D software
command (see section on software commands).
(Fig.2)
INTRODUCTION
User Manual
VKP112 3