Custom Audio Electronics TL60III, Руководство пользователя

Страница: 55 / 84

7.3 Printing area
In order to print ticket containing only one black mark and to not overlay printing to a black mark (that will make it useless
for the next alignment), it is important to well calibrate the length of the printing area of ticket according to the inter-black
mark distance.
The following igure shows an example of tickets with “Black Mark Distance” set to 0:
A A
L
D H
PRINTING
AREA
PRINTING DIRECTION
Printing line Printing line Cutting line Cutting line
A “Non-printable area” = “Distance between autocutter/printhead”
where:
“Distance between autocutter/printhead” = 13 mm for TL60III
“Distance between autocutter/printhead” = 12.5 mm for TL80III
H Distance between the irst and the last print line, called “Height of the printing area”.
L Distance between an edge of the black mark and the next one, called “Inter-black mark distance”.
D Automatic feed for alignment at the next black mark.
To use all the black marks on the paper, you must comply with the following equation:
H + A ≤ L
The height of the printing area H can be increased to make no progress on alignment D but no further.
55