Custom Audio Electronics TL60III, Руководство пользователя

Страница: 45 / 84

PAPER THRESHOLD Threshold value (in percent) for the recognition of the presence of paper by the paper
presence sensor:
30% 60% 90%
40%
D 70%
50% 80%
PAPEREND BUFFER CLEAR Cleaning mode of the data in receive buffer, if the printing is stopped due to lack of paper:
Disabled D = the data remain in the receive buffer. When the paper runs out, the device
keeps the remaining data in the receive buffer and prints the remaining
portion of the ticket after that the new paper is loaded.
Enabled = when the paper runs out, all data in the receive buffer are deleted.
LOW ENERGY MODE Setting the inactivity period in seconds after which the device enters in sleep mode:
Disabled
D
15 s
30 s
60 s
CUTTER Set the autocutter management:
Disabled = Autocutter disabled
Enabled
D
= Autocutter enabled
PRINT DENSITY Adjusting the printing density:
-25% 0
D
+25%
-12% +12%
NOTE:
The print quality is strongly inluenced by the type of chemical treatment and the type
of storage to which the thermal paper has been subjected, as well as by the weight of
the same. It may therefore necessary to act on this parameter to obtain the desired
print quality.
45