Custom Audio Electronics TG02H, Руководство по управлению

Страница: 61 / 100

0x1D 0x2F <GS />
Print dowloaded bit image
Valid for TG02H
[Format] ASCII GS / m
Hex 1D 2F m
Decimal 29 47 m
[Range]
[Description] Prints a downloaded bit image using the mode specified by m.
m selects a mode from the table below:
m MODE
0,48 Normal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
[Notes] • This command is ignored if a downloaded bit image has not been defined.
• In standard mode, this command is effective only when there is no data in the print buffer.
• This command has no effect in the print modes (emphasized, underline, character size, or white/
black reverse printing), except for upside-down printing mode.
• If the downloaded bit-image to be printed exceeds the printable area, the excess data is not printed.
• If the printing area width set by 0x1D 0x4C and 0x1D 0x57 is less than the bit image horizontal size,
the following processing is performed:
1) The printing area width is extended toward the right side up to hold the bit image. In this case,
printing does not exceed the printable area.
2) If the printing area width cannot be extended toward the right side, because there’s no more print-
ing area, the left margin is reduced to accommodate the bit image.
[Default]
[Reference] 0x1D 0x2A
[Example]
ESC/POS™ emulation
│ 61